Share By Email   Share By SMS

Exclusive Trades

Detailed FAQ answer

How Much Does It Cost To Disconnect / Connect A Gas Cooker?

A straight answer for Eastbourne homeowners on what is involved and why cutting corners on this job can cost you a lot more than money in the long term.

Freddy from Exclusive Trades using an iPad

If you're fitting a like-for-like gas cooker — same footprint, same kW rating, going in to the same location, and you have no existing gas leaks – This would be classed as a small installation and charged at our minimum rate of £187 plus materials.   However, as you will read below, this work has the potential to escalate in cost if the original installation was not fully compliant with Gas Safe Regulations.

The slightly longer answer

Installing or removing a gas cooker safely isn't just a case of disconnecting/connecting the cooker hose to the gas supply, there are a number of safety tests that need to be completed at various points of the work.

  1. Gas tightness test. YOU MUST BE GAS SAFE REGISTERED TO DO THIS TEST. This is a test of your existing gas installation that looks for any leaks before any work starts. (Small leaks can go unnoticed for months — you might have one right now and not know it.) Any leak found during this test has to be fixed before we can start installing the new cooker.
  2. Removing a cooker. Most cookers are attached to the gas pipework by a flexible hose in to a self-sealing valve. However these valves can, and do fail leading to a small gas leak that can easily go unnoticed once a cooker has been disconnected. To eliminate the risk of these leaks, a special fitting should be installed once the hose has been removed and another tightness test YOU MUST BE GAS SAFE REGISTERED TO DO THIS TEST. is carried out to make sure the gas supply is safe.
  3. Connecting a cooker. When installing a cooker the Gas Safe Plumber is required to make sure the gas supply pipe meets the current regulations and where it doesn't the gas supply may need modifying.
    Provided the gas supply meets current regulations, installing a cooker is essentially the reverse of the removal. . .  You carry out the tightness test YOU MUST BE GAS SAFE REGISTERED TO DO THIS TEST. attach a new hose to the cooker if needed, connect the hose to the gas supply, carry out another tighness test YOU MUST BE GAS SAFE REGISTERED TO DO THIS TEST. and then test the gas supply is able to provide sufficent gas for the new cooker to operate safely. YOU MUST BE GAS SAFE REGISTERED TO DO THIS TEST.
  4. Ventilation. A room with a gas cooking appliance needs a minimum amount of ventilation for the burners to operate safely without creating dangerous levels of carbon monoxide — sometimes this can be as simple as a having a window or door that opens directly to the outside.   Kitchens without either of these are treated as internal kitchens with their own, stricter rules around ventilation. We will be able to advise you on the requirements for your specific appliance when we arrive at your property, but correct ventilation is vital to prevent carbon monoxide poisoning in your home.
  5. Minimum clearances. Every cooker comes with a installation manual that details the minimum clearances required from the cooker to another surface to prevent heat damage/fire. If these minimum clearances are not achieved, the cooker cannot be installed. (Quite often DIY kitchen fitters fail to read this installation guide and incorrectly locate the cooker and, over time the homeowner starts to notice heat damage to nearby cupboards and worktops.)
  6. Registration. The completed installation is registered with the Gas Safe Register YOU MUST BE GAS SAFE REGISTERED TO DO THIS TEST. (We always do this while we are at your property), and you will then receive a Building Regulations compliance certificate through the post from 'The Gas Safe Register' at a later date.

Is Exclusive Trades the company you want?

The first thing you need to know is, you will find a cheaper company elsewhere, meaning if you are specifically looking for the cheapest company in town, we are not the company you're looking for.

Upon completion of any work, we welcome an inspection form the Gas Safe Register, the Local Water Authority or the local Building Control to verify our work fully complies with all relevant regulations.

Obviously we understand that nobody wants to pay more than they have to for work in their home, but at the same time you probably don't want your gas appliances exposing you and your loved ones to Carbon Monoxide do you?   (At low levels Carbon Monoxide causes tiredness and headaches that clear when you leave the house, at higher levels it can lead to hospitalisation, possible permanent brain damage or death.).   You probably also don't want to expose yourself and your loved ones to waterborne pathogens such as leptospirosis, giardia, norovirus and legionella, which can be contracted through the plumbing installation in your home if certain regulations are 'overlooked' to keep costs down.

Therefore. . .  We would rather be known as the Expensive Company in town, rather than a company that put you or your loved ones in hospital because they wanted to give you a cheaper price! . . . and this applies to all of our work, from basic plumbing to gas installations.

If the safety of everyone in your home is important to you, keep reading the next section to see if we are the type of company you want to have working in your home.

Before You Contact Us. . . 

Assuming you. . .

  •   Want the work to comply with all regulations.
  •   Want the work carried out to a high standard.
  •   Accept we will not be the cheapest company in town.

. . .  then there is just one last question to determine if we are the right company for you? . . . Would you object to having 'Freddy' in your home while the work takes place?




If you have no objections to Freddy being in your home while this work takes place, contact us using the button below to schedule your appointment now.


Book Your Appointment Today